Bookmark and Share

GCL Poly Panels Review – Types, specifications, warranty

2 Comment

GCL Poly Solar Panels

The world’s largest solar polysilicon and wafer maker is GCL Poly, with 70,000 tons of poly and 14 GW of wafer capacity. The company extended its dominance in solar module and cell manufacturing by acquiring a controlling stake in Chaori Solar after Chaori Solar underwent the first bond default in China. GCL-New Energy bought a 30% stake in Chaori Solar and together with other investors have a 66% majority shareholding. GCL now has 520 MW solar cell and 800 MW module production capacity from Chaori Solar and Chaori Solar has been supplying to GCL New Energy. GCL now sells Chaori solar panels and has its own solar panels rather than outsourcing it.

The company has a wide product range and offers crystalline silicon solar modules, cells, silicon, batteries, ingots and other solar products like solar lights.

GCL Poly Solar Panels

These panels can be used in a wide range of application and are most suited for regions with extreme weather conditions. They have robust frames and are very durable in nature. The cells are embedded in EVA and Tedler, have a safety glass with anti-reflective coating and are water and weather proof. The modules are easy to install with compatible frames.

GCL modules can be used for both off grid and on grid applications and are also ideal for utility, commercial and residential rooftop installations.


GCL Poly solar modules come with 10-year product workmanship warranty and 25-year linear power output warranty

Other Specifications:

  • Polycrystalline 60 celled modulesgcl
  • Module Efficiency – 15.5%
  • Positive power tolerance as high as from 0 to 5W.
  • Dimension 1650mm*990mm*42mm
  • Weight 19.5kg
  • Can withstand snow loads up to 5400Pa

Types of GCL Poly Solar Panels

GCL Poly Solar Panels can be divided into types based on the wattage.

  • GCLP6-60235 – 235 W polycrystalline 60 celled, with module efficiency of 14.4%
  • GCLP660240 – 240 W polycrystalline 60 celled, with module efficiency of 14.7%
  • GCLP6-60-245 – 245 W polycrystalline 60 celled, with module efficiency of 15%

 Other data:



Sneha Shah

I am Sneha, the Editor-in-chief for the Blog. We would be glad to receive suggestions, inputs & comments on GWI from you guys to keep it going! You can contact me for consultancy/trade inquires by writing an email to

2 Responses so far | Have Your Say!

  1. abhishek

    pls provide prices for above and give your expert comment on which is best economic and feasible module to set up 1 Mw solar power project .

  2. elsidig E Osman

    Dear Sir,
    I appreciate your help for design and cost estimate of grid-off stand alone solar system, that will run an induction motor safely. The motor specification is 15HP (approximately 11KW), 3-phase 415V, 50Hz and to drive V-Belt Driven rotary (centrifugal) pump, which is used for agricultural water pumping from a deep Well, the motor and the pump will be installed under the ground level of 15 meter. My plan to operate it during the day light only. The solar radiation level is 2300kwh/m2 or Annual Average Peak Sun Hours (PSH) is 6.53.

    Another project is as follows: grid-off stand alone solar system, that will run the options loads below:
    1. Suitable complete Solar Power size to operate two submersible water pumps installed on one place and each of 10KW load, 3-Phase, 415V AC, 50Hz, their operation for agricultural water pumping.
    As an option to us:
    2. Suitable complete Solar Power size to operate one submersible water pump, 10KW, 3-Phase, 415V AC, 50Hz, and its operation for agricultural water pumping